Pebeo
Setacolor Leather Auxiliaries

Setacolor Leather, a complete range for customising and repairing leather & imitation leather. These adapted auxiliary products allow you to: PREPARE - CREATE - PROTECT your creations without altering them.

Preparer and Deglazer *- Prepare and degrease the surface, so as to remove the protective varnish that covers it and to degrease it for optimal adhesion of the colours. To be used before applying bottled or marker colours. Soak an absorbent paper towel or cloth with the degreasing agent and rub the surface to be prepared.

Lightening Thinner Medium - For airbrushing, it is recommended to make a 1:1 mixture (thinner and colour) to obtain an optimal viscosity for a smoother airbrush. This technique is highly recommended for customising sneakers. The result is uniform (if you master the airbrush technique) and leaves no trace of paint. This auxiliary also lets you dilute, liquefy and lighten Setacolor Leather colours when applied with a brush or airbrush without altering their properties (resistance, shine, etc.) unlike diluting with water.

Glue - Auxiliary for bonding various materials (cotton, leather, polyester, etc.) and materials (pearls, powders) to leather or imitation leather. The glue should be applied only to the areas to be glued, and we recommend gluing directly without waiting for it to dry. It is crucial to remove any residues before the glue dries.,p>

Masking Fluid - Peelable drawing gum once dry for defining paint-free areas on leather or synthetic leather, for drawing or writing.

Matt/Satin and Gloss Varnishes - For optimal and long-lasting results, protective varnishes must be applied to the work. Available in 2 finishes: matt/satin or gloss.

* Hazardous product. Observe the precautions for use. Use only outdoors or in a well ventilated area.